Extensive use of fishing gear fishery production , and its proper use and maintenance , for lower costs, improve economic efficiency, extend the period of use, are important. Good fishing gear storage work , first of all deal with various fishing tackle physical and chemical properties of some understanding . For example, some production units to Polyethylene and nylon mesh placed in long-term outdoor exposure, resulting in decreased strength of the network cable to reduce the use of fishing gear , often resulting in large economic losses . So gear storage and maintenance should note the following:

( 1) fishing gear storage , you should put dirt on fishing gear , such as dirt , greasy fish attachments washed with fresh water , then dry , and remove the float , sink in , and other appurtenances were stored . Before storage hooks , hooks should be washed clean , sharpened , and coated with anti-rust oil , and then stored in a dry place.

( 2 ) Storage sites should maintain good ventilation , no direct sunlight . For the small number and the small size of the fishing gear, can be tied tie hanging in the beams . For available and bulky gear , should be stored in the ground is high, with good ventilation warehouse.

( 3 ) during storage ground inspection, when the weather is sunny, the air is dry , open the warehouse doors and windows to allow air circulation . In case of rain or high temperatures , the warehouse doors shall be kept closed , do not arbitrarily open . Rainy or summer season for the warehouse should pay more attention , because vegetable fiber mesh and net rope is easy to mold , once the fine , should immediately show in the sunlight to dry, if necessary, appropriate spraying fungicides. Also note that the warehouse insecticide , rodent and other work.

( 4 ) synthetic although the ratio of plant fiber has good corrosion resistance , some synthetic fibers such as acrylic, nylon , etc., in a long time high temperature and humidity will produce larger case moldy , strength of materials will be affected. So for those made ​​with synthetic gear should also pay attention to air dry . Most of the lack of good Japanese synthetic fiber optical performance , do not use this type of material gear long exposure to sunlight . Some synthetic mesh should not be too bent folded to avoid affecting the cable strength and reduce the useful life .

( 5 ) at the end of the job or job temporarily , should all fishing gear is washed to remove debris , which is closely related not only to the effects of fishing and fishing gear protection is at stake. If you do not clear the mesh attached to the debris until the job, the mesh will be uneven due to the force and tear .